Aluminum brush/rubber mat
Description
Rubber coating and scrubbing-brush profile
Sturdy aluminum structure linked by a laminar rubber profile with nylon tuft coating. The brushes capture the deepest dirt from the soles and guarantee anti-slip properties. No gaps between profiles (closed, rollable structure). Extremely sturdy, making it easy for carts, heeled shoes and people with reduced mobility to pass over.
Would you like a free-standing aluminum mat with the addition of a ramp?
Contact one of our specialists for a project study.
Available on request.
PERSONALIZATION
BART (stainless steel bar with laser-engraved logo):
Manufactured with a laser-perforated double inverted U-shaped sheet of stainless steel, customized with logo colors.
Anodizing of aluminum profiles:
The anodizing process allows aluminum metal profiles to be colored.
Painting and coloring RAL profiles:
Much more environmentally friendly than anodizing, painting provides gloss and matte finishes on all aluminum profiles and accessories.
Special painting:
This process enables results such as photoluminescence of aluminum profiles, a wood effect or many other unique effects.
ACCESSORIES
- Containment frame in: aluminum, steel and brass
- Anodized aluminum wire cover
- Anodized aluminum towable anti-tip ramp
- Stainless steel containers (optional drainage)
- Sound-absorbing foam
CLEANING
To ensure that your mats last a long time and remain functional, we recommend a thorough cleaning every week.
Vacuum the top of the mat, roll it up and remove any dirt accumulated on the bottom using a stiff bristle brush and vacuum cleaner (for the drainage structure). In thecase of stubborn dirt, wash after regular cleaning. Use a high-pressure cleaner (from a distance of at least 70 cm) to remove any dirt that has accumulated between the slats and on the covering. Allow the mat to dry completely, vertically if possible, before replacing it. To remove stains from the textile covering, you can clean the surface of the mat using warm water, a clothes brush and the appropriate degreaser.
If the covering strips are irreversibly damaged (chewing gum, oil and cigarette burns) or in the event of extreme wear, you can contact us for partial or total replacement.
RECOMMENDED APPLICATIONS :
Ideally used indoors or covered outdoors - suitable for high-traffic entrances
Boutique - GSS - Agence commerciale - Centre commercial - Commerces / magasins - Gymnase - Salle polyvalente - Club privé / fitness - Loisirs - Établissements sportifs - Scolaire - Petite enfance - Bibliothèques - Centre de documentation - Médiathèques - Universités - Écoles privés - Salles d'expositions- Musées - Salles de conférences - Restauration - Résidence de tourisme - Bureaux Privés - Administrations publics - Salles de conférences - Salles de réunion - Banques
Fast delivery (within 5 working days)*.
*Delivery times are ex works.
*Delivery times are ex works.
They are indicative and subject to product availability at ourfactories.
| full-25-spazzola |
Data sheet
| Location | Exterior Outdoor under cover |
| Intensity of passage | Very intense |
| Properties | Customizable Scraping |
| Thickness | 25 mm |
| Weight | 22 kg / sqm |
| ERP category | 1 (+ 1500 passages) 2 (701 to 1500 passages) |
| Distance between profiles | Closed |
| Profile height | 20 mm |
| Profile material | Aluminum alloy EN AW-6060 from primary billet |
| MAX length of the profiles | 300 cm - 200 cm for foreign countries (extraordinary lengths can also be estimated) |
| Gateway length MAX | 200 cm (extraordinary lengths can also be evaluated) |
| Coating | Nylon tufts made of PA monofilament with a section of 0.3 mm punched on a thermoplastic support |
| Certifications | ISO 9001-2015 quality certificate |
| Profile structure | Aluminium |
- Profile height: the higher the profile, the greater its dirt-holding capacity.
- Profile types: the thicker the profile cross-section, the more resistant the mat will be to rolling loads.
- Coatings: (reps, rubber or brush): The place of installation, the environment and the type of soiling determine the type of covering.
- Reps,
- Brush
- Gum
- Choice of height, etc.
Retains virtually all dirt thanks to an ingenious combination of technical entrance mats mounted on aluminum profiles and cleanliness coatings.
Ideal for the heaviest traffic, over 1,000 passages per day, and withstands caddies, carts, baby carriages and suitcase wheels.... Reduces the risk of slipping on wet floors and the cost of cleaning your entrance. Suitable for high-end building entrances that require a bright mat without loss of quality.
Aluminum mats are used when an entrance is used by more than 1,000 pedestrians or wheeled loads per day. When the reception area is divided into 3 zones (outside, inside entrance, inside building)
When choosing an aluminum mat, there are a few criteria to take into account:
(Reps ensures dirt pick-up and moisture absorption. Rubber and brushes only capture dirt).
Provides optimum protection against dirt and grime, and can be customized to suit your needs. Reduces cleaning costs and respects the environment, ensuring the longevity and neat appearance of your entrance. Reduces the risk of slipping on damp floors. Aluminum mats stand out for their efficiency, functionality, resistance, adaptability and wide range of customization options.
Easy maintenance of the pit where dirt falls, easy to replace, simply replace the profiles (no need to replace the aluminum frame). Replacement of the reps strips extends the life of the mat, while reducing investment and ensuring respect for the environment.
Aluminium mats are made from high-quality materials to ensure optimum product longevity.
We offer a wide choice of colors to match your interiors.
Several cladding styles to choose from:
Flexible, customizable combinations of different types of matting for complementary, consistent action whatever the configuration of your entrance.
Autres produits de la même catégorie
