Brushed/needled plastic structure mat
Description
Scratching brush profile - Needled fiber profile
Sturdy, impact- and scratch-resistant PVC structure linked by a nylon tufted profile and rough fiber profiles. The brushes will capture the deepest dirt on the soles (fine particles), while the rough fibers will capture and scrape the coarsest dirt under the soles, while guaranteeing anti-slip properties. Profile spacing 5 mm. Extremely sturdy, for easy passage of carts, heeled shoes or people with reduced mobility.
Would you like a free-standing aluminum mat with the addition of a ramp?
Contact one of our specialists for a project study.
Available on request.
PERSONALIZATION
BART (stainless steel bar with laser-engraved logo):
Manufactured with a laser-perforated double inverted U-shaped sheet of stainless steel, customized with logo colors.
Painting and coloring to RAL profiles:
For technical mats in PVC (Plastik 17), in addition to the 2 colors always available (black and lead), it is possible to create profiles in other RAL colors.
ACCESSORIES
- Containment frame in: aluminum, steel and brass
- Anodized aluminum wire cover
- Anodized aluminum towable anti-tip rail
- Needle-punched strips for replacement
- Special silicone for bonding needle-punched strips
- Connectors for connecting technical mats
- Stainless steel containers (optional drainage)
- Sound-absorbing foam
CLEANING
To ensure that your mats last a long time and remain functional, we recommend a thorough cleaning every week.
Vacuum the top of the mat, roll it up and remove any dirt accumulated on the bottom using a stiff bristle brush and vacuum cleaner (for the drainage structure). In thecase of stubborn dirt, wash after regular cleaning. Use a high-pressure cleaner (from a distance of at least 70 cm) to remove any dirt that has accumulated between the slats and on the covering. Allow the mat to dry completely, vertically if possible, before replacing it. To remove stains from the textile covering, you can clean the surface of the mat using warm water, a clothes brush and the appropriate degreaser.
If the covering strips are irreversibly damaged (chewing gum, oil and cigarette burns) or in the event of extreme wear, you can contact us for partial or total replacement.
RECOMMENDED APPLICATIONS :
Ideally used indoors or covered outdoors - suitable for high-traffic entrances
Boutique - GSS - Agence commerciale - Centre commercial - Commerces / magasins - Gymnase - Salle polyvalente - Club privé / fitness - Loisirs - Établissements sportifs - Scolaire - Petite enfance - Bibliothèques - Centre de documentation - Médiathèques - Universités - Écoles privés - Salles d'expositions- Musées - Salles de conférences - Restauration - Résidence de tourisme - Bureaux Privés - Administrations publics - Salles de conférences - Salles de réunion - Banques
Fast delivery (within 5 working days)*.
*Delivery times are ex works.
*Delivery times are ex works.
They are indicative and subject to product availability at ourfactories.
| plastik-17-misto-spazzola |
Data sheet
| Location | Interior Outdoor under cover |
| Intensity of passage | Intense |
| Properties | Customizable Scraping |
| Thickness | 17 mm |
| Weight | 10,5 kg / m² |
| ERP category | 3 ( 301 to 701 passages) 4 ( -300 passages) |
| Distance between profiles | 5 mm |
| Profile height | 12 mm |
| Profile material | Shock and scratch resistant PVC |
| MAX length of the profiles | 300 cm - 200 cm for foreign countries |
| Gateway length MAX | 300 cm (extraordinary lengths can also be evaluated) |
| Coating | Punched needle ARAN 100% PP UV 1500 gr / m² Nylon tufts in PA monofilament of 0,3 mm section punched on a thermoplastic support |
| Certifications | ISO 9001-2015 quality certificate |
| Profile structure | PVC |
- Profile height: the higher the profile, the greater its dirt-holding capacity.
- Profile types: the thicker the profile cross-section, the more resistant the mat will be to rolling loads.
- Coatings: (reps, rubber or brush): The place of installation, the environment and the type of soiling determine the type of covering.
- Reps,
- Brush
- Gum
- Choice of height, etc.
Retains virtually all dirt thanks to an ingenious combination of technical entrance mats mounted on aluminum profiles and cleanliness coatings.
Ideal for the heaviest traffic, over 1,000 passages per day, and withstands caddies, carts, baby carriages and suitcase wheels.... Reduces the risk of slipping on wet floors and the cost of cleaning your entrance. Suitable for high-end building entrances that require a bright mat without loss of quality.
Aluminum mats are used when an entrance is used by more than 1,000 pedestrians or wheeled loads per day. When the reception area is divided into 3 zones (outside, inside entrance, inside building)
When choosing an aluminum mat, there are a few criteria to take into account:
(Reps ensures dirt pick-up and moisture absorption. Rubber and brushes only capture dirt).
Provides optimum protection against dirt and grime, and can be customized to suit your needs. Reduces cleaning costs and respects the environment, ensuring the longevity and neat appearance of your entrance. Reduces the risk of slipping on damp floors. Aluminum mats stand out for their efficiency, functionality, resistance, adaptability and wide range of customization options.
Easy maintenance of the pit where dirt falls, easy to replace, simply replace the profiles (no need to replace the aluminum frame). Replacement of the reps strips extends the life of the mat, while reducing investment and ensuring respect for the environment.
Aluminium mats are made from high-quality materials to ensure optimum product longevity.
We offer a wide choice of colors to match your interiors.
Several cladding styles to choose from:
Flexible, customizable combinations of different types of matting for complementary, consistent action whatever the configuration of your entrance.
Autres produits de la même catégorie
